After a long day at the office and a hefty drive back home, all you can think of is a nice shower and a cup of coffee watching your favorite baseball game. You get home and hit the remote button to open the garage door so that you can park the car and get on with the evening already. Nothing happens, the garage door doesn’t open. You click the button repeatedly in frustration, but to no avail. The last thing you want to deal with is a garage door repair Austin! Get more informations about Garage Door Repair Surrey Association
In such an instance, most people would call the repair guys right away or go get them. How about you take a look at the problem yourself, before you get a cab or run to the nearest dealer or repair shop. Maybe, it’s not as big a problem as you think it is, and you can solve it all by yourself. Remember, you were provided with a handbook the day of your garage door installation, which has some troubleshooting guidelines. Of course, it is the first thing you should be looking at.
Let’s see what else you can do when your system is acting up.
1. Remote failure is usually the most common cause of a door acting up. Always keep a spare unit with you, so that you can check if the problem lies within the remote or somewhere else.
2.In case your remote seems to be fine, check the sensors, which receive the signals from your remote. See that the sensors are not covered by dust or anything else because that can block the smooth transmission of signals.
3.Once you have checked the remote, see that the hinges and rollers on which the gate moves are properly lubricated. This is one of the major reasons, which make the things worse slowly and steadily, and in the end, you have to spend some bucks on garage door repairs Austin.
4.Also check if all the cables and wires are properly connected and there are no mismatched wires. A prime indicator of this problem is the jamming of the door in the middle or right next to the floor. The door would fluctuate and stop randomly in the middle of opening and closing.
5.The tracks on which your door slides open and shut are held in their place by brackets, which can get loose and cause improper shutting or closing of the door. You can easily fix the problem by slowly tightening the nuts and bolts.
6.There is a chance that the tracks are dented or bent out of shape, if your garage door is an old one and it’s been a while since you had it checked by professionals. You can try putting them back in shape with a hammer. Make sure you don’t hit too hard or you might break the whole thing itself.
7.If you are living at an excessively cold place, there is a chance that the door gets jammed. See the settings once again and see if adjusting the pressure can help.
8.The last thing that you could check is the torsion spring. The opening and closing of the garage door is controlled by this spring installed on top of the door. This is what pulls your heavy door and it is under immense amount of tension. Beware, this is the dangerous part and you should probably always call in the specialists, unless you have the expertise and tools yourself.